General Information: POLYURETHANE GUN FOAM is a multi purpose filling and montage foam. Manufactured from imported raw materials. Its extra formulation cures by moisture 1 to 3 hours.
Application: For fixing doors, windows and similar frames, filling holes, used in insulation of hot and cold water pipes and electrical equipments, fill up the gaps, holes and cracks.
Technical Properties: •Can be shaved, sandpapered and painted after it get hardens in 1 or 3 hours. •Bonds to all kinds of building materials except silicone, teflon, polyethylene and polypropylene. •Resistant to every kind of weather conditions, seawater, steam and moisture. •Not easy flammable.
Direction For Use: •Shake the can strongly for 30 seconds •Install the pistol by twisting onto the can. •Remove the dirt, dust and grease from the application place and moisture it by water. (Moisturing the ground and released foam is important for accelerating the reaction and obtaining a productive result). •Turn the can upside down and press the trigger. •For next applications, dried foam residue should be removed from the pistol and valve. •Smeared foam residue can be cleaned by ANTIA PU FOAM CLEANER. •Since foam tenders to expand, proper quantities should be used. 
Expiry Date: 15 months after production date.
Production date is on the can.
Title Properties
Curing System: Moisture
Skin Forming Time: 8-10 min
Cutting Time: 30-45 min
Ultimate Elongation (%): 19
Tensile Strength: 3 N/cm²
Density: 17-20 kg/m²
Thermal Resistance: -40°C to +100°C
Yield: 50 lt
Closed Cell Content (%): 70-80
Thermal Conductivity: 25-30 M W/m.K
Application Temperature: -15ºC / +30ºC
Storage Temperature: -5ºC / +30ºC