A305
General Information: ANTIA PREMIUM, is an assembly and filling foam with boosted volume by its special formula. It is a multi purpose foam and is cured by the humidity of air.
Application: For fixing doors, windows and similar frames, filling holes, used in insulation of hot and cold water pipes and electrical equipments, fill up the gaps, holes and cracks. Can be shaved, sandpapered and painted after it get hardens in 1 to 3 hours. Bonds to all kinds of building materials except silicone, teflon, polyethylene and polypropylene. It is resistant to every kind of weather conditions, seawater, steam and moisture. Not easy flammable.
Directions For Use: •Shake the can strongly for 30 seconds. •Install the foam gun on the can. •Remove the dirt, dust and grease from the application place and moisture it by water. (Moisturing the ground and released foam is important for accelerating the reaction and obtaining a productive result). •Turn the can upside down and press the trigger. •For later applications, dried foam residue should be removed from the pipe and valve. •Smeared foam residue can be cleaned by ANTIA PU FOAM CLEANER. •Since foam tenders to expand, proper quantities should be used.
Application: For fixing doors, windows and similar frames, filling holes, used in insulation of hot and cold water pipes and electrical equipments, fill up the gaps, holes and cracks. Can be shaved, sandpapered and painted after it get hardens in 1 to 3 hours. Bonds to all kinds of building materials except silicone, teflon, polyethylene and polypropylene. It is resistant to every kind of weather conditions, seawater, steam and moisture. Not easy flammable.
Directions For Use: •Shake the can strongly for 30 seconds. •Install the foam gun on the can. •Remove the dirt, dust and grease from the application place and moisture it by water. (Moisturing the ground and released foam is important for accelerating the reaction and obtaining a productive result). •Turn the can upside down and press the trigger. •For later applications, dried foam residue should be removed from the pipe and valve. •Smeared foam residue can be cleaned by ANTIA PU FOAM CLEANER. •Since foam tenders to expand, proper quantities should be used.
Expiry Date: 18 months after production date. Production date is on the can.
| Title | Properties |
|---|---|
| Curing System: | Moisture |
| Skin Forming Time: | 8-10 min |
| Cutting Time: | 35-45 min |
| Ultimate Elongation (%): | 19 |
| Tensile Strength: | 3 N/cm² |
| Density: | 17-20 kg/m³ |
| Thermal Resistance: | -40°C to +100°C |
| Yield: | 65 lt |
| Closed Cell Content (%): | 70-80 |
| Thermal Conductivity: | 25-30 ? W/m.K |
| Application Temperature: | 0ºC /+35ºC |
| Storage Temperature: | 0ºC /+30ºC |